Wöhr Enclosures


Akku-enclosure

Akku-enclosure series APP

The battery-enclosures APP were not only developped to snap them on our enclosures but can be fixed at any place on enclosures and front plates. Therefore, a basic plate for the snapping of the APP-enclosure is available (picture above on the left). The basic plate can be fixed on any enclosure with a suitable aperture. The enclosures are designed for the installation of large battery-capacities (see technical data).
An aperture (with plug) can house a 2-pole female connector for the direct charging with plug charging device.

The APP-enclosures can be delivered in different standard versions.
This offers various possibilities. Two or three contacts are provided.

Technical data
dimension 4.45 x 3.11 x 1.02 (1.73) inch
113 x 79 x 26 (44) mm
material ABS (material change possible)
color light gray RAL 7035
  black RAL 9005
protection degree up to IP54 according to EN 60529
surface EMI- and ESD-version possible
dielectrical strength 24 kV/mm according to DIN 53481
flammability UL94HB (V0 possible)
circuit board layers 1
weight asic plate ca. 30 g
battery enclosure APP-2
(H=26mm) ca. 70 g
battery enclosure APP-3
(H=44mm) ca. 80 g