Wöhr Enclosures

Scanner and antenna enclosure

Scanner- and Antenna Enclosures SPA-1 and SPA-2

This antenna enclosure can be screwed with its base on any enclosure.
It is fixed on our enclosures on the removable covers of the front side.
The enclosure can be overturned 180° with ratchet and is prepared for:

1) GPS- and telephone-antenna and 1D or 2D Laser-Scanner

2) biometrical chip and card reader

3) biometrical chip and 1D or 2D scanner.

The parts can be installed as in 1) to 3) as a whole or individually.
A broad foil cable can be led trough the axis and the base.

Technical data
dimensions 2.83 x 3.05 x 0.89 inch
72 x 77,5 x 22,6 mm
material ABS (material change possible)
color light gray RAL 7035
  black RAL 9005
protection degree up to IP54 according to EN 60529 also contacts for charging station
explosion protected on demand
surface resistance 4 x 10 (high 14) Ohm according DIN 53482
dielectrical strength 24 kV/mm according to DIN 53481
flammability UL94HB (V0 possible)
boring in axis 7,5 mm diameter
weight ca. 47 g

You can get to the individual tables through a click onto the cross X

Overview of the scanner- and antenna enclosure
  painted acc. to RAL
price category(PG1)
painted acc. to RAL
price category(PG2)
painted acc. to RAL
price category(PG3)
enclosure x x x
EMI-version x    
ESD-version x    
MED-version x    
AMIK™-version (antimicrobial) x    
NAWARO™-version (made of bioplastics)
SILVERlook-version x    

More information about suitable accessories can be found here ->