Steel sheet enclosure series ST004

steel sheet

degree of protection:

IP 66 - to VDE 0470/ DIN 40050/ EN 60529

colour:

powder coating light grey (similar to RAL 7035) light structured

versions:

23.62 x 31.5 x 31.5 inch
(200 x 300 x 125 mm up to 600 x 800 x 800 mm)
wall enclosure with single-vent door, with mounting plate

modifications:

special features:

hinges concealed, made out of steel,
opening angle 180°, additive internally angle with a width of 1.04 inch (26,5 mm) and thin gap in the door prevent entrance of dirt and water while opening the door, the door's opening direction can be changed without drilling, big usable depth, maximum depth D-0.63 inch (D-16 mm), flexible system accessories, protective ground connection to DIN EN 61439-1, studs M6x16 on door and body, door with seamlessly foamed gasket, standard opening direction is right side, change of opening direction without drilling

closure:
up to a height of 15.75 inch (400 mm) with 1 turn lock, from a height of 15.79 inch (401 mm) with 2 turn locks, from 31.54 inch (801 mm) with 3-point-locking, standard actuation 0.12 inch (3,05 mm) double-bit

doors with a height from 15.75 inch (400,05 mm) are fitted on both sides with bolted reinforcement and hole profiles with fixing drillings in
98 inch (24,89 mm) increments for screws size M5

bottom panels with a width of > 15.75 (400 mm) inch and a depth of 7.87 inch (200 mm) with external cable entry panel made from sheet steel, fixing takes place using Gefu-screws M4 with torx T20

mounting panel on the back wall with securing screw standard length M8x30, maximum
0.39 inch (10 mm) depth-adjustable, the edged mounting panel is fixed

included in scope of delivery:

enclosure incl. screws and mounting plate
(supplied loose) and their mounting components,
with mounting kit for protective conductor terminal as well as 1 key