Design W-2120-GK
Features of ths design
Operating position: Lying (front handle)
- locks in front, hinges in the back
Dimensions
Dimensions | Min. Max. Inside dimensions in mm |
X = width | 200,0 - 1500,0 (in 0.5 mm increments) external dimensions: + 21,0 mm |
Y = length | 100,0 - 400,0 (in 0.5 mm increments) external dimensions(incl. fittings): + ca. 65,0 mm |
Z = height (Z1 + Z2) Z1 = height of the housing part Z2 = height of cover part | 25, 50, 75, 100, 125 (in 25 mm increments) 25, 50, 75, 100, 125 (in 25 mm increments) external dimensions: Z + 12 mm |
Note:
In this design (front handle), the dimension Z is always smaller than the dimension Y.
Lid opening types
Code | Lid top Z2 | locks | hinges |
231 | 180o to the rear | ahead | behind |
233 | 180o to the left | right | left |
234 | 180o to the right | left | right |
Note: This design is only available with a cover opening of 180 °.
Enclosures part Z1 and cover part Z2 are always the same height. Both halves of the case are flat in the open state. Particularly suitable for front panel installation as well as sample cases for holding foam moldings, trays, etc.