Design W-2730-GK
Features of this design
Operating position: Standing (handle above)
- locks left and right or above
Dimensions
Dimensions | Min. -Max. Internal dimensions in mm |
X = width | 200,0 - 800,0 (in 0.5 mm increments) external dimensions: + 21,0 mm |
Y = height | 100,0 - 600,0 (in 0.5 mm increments) external dimensions(incl. fittings): + ca. 65,0 mm |
Z = length (Z1 + Z2 + Z3) Z2 = length enclosures part center |
75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400 (in 25 mm increments) |
Note:
In this design (handle above), the dimension Z is always smaller than the dimension Y.
Lid opening types
Code | Lid front Z3 | locks | hinges |
316 | 95° forward | laterally | - |
Note: Lid front Z3:
This lid opening is only forward. Lid (internal height Z3 = always 25 mm) particularly suitable for installation of a front panel for keyboard, laptop or an intermediate flap with storage compartment (internal height max 22 mm) for accessories.
Code | Cover rear Z1 | locks | hinges |
155 | removable to the rear | left and right | - |
115 | 95° to the rear, then enclosures Z2 tilted forward | left and right | below |
125 | 120° retractable to the rear, then tilted enclosures Z2 forward | left and right | below |
135 | 180° to the rear, then tilted enclosures Z2 forward | left and right | below |
Note: Rear cover Z1:
The opening type Code 155, 125 and 135 is very advantageous for the installation of an intermediate flap as an accessory compartment. The opening code code 115 is very advantageous as a service flap.