Design W-2230-GK: enclosures profiles
Pos. | Construction designation | Material |
1 | under partial profiles | Aluminum frame profiles, natural anodized with dividers in 25 mm grid, guide spring for enclosures separation |
2 | between partial profiles | Aluminum frame hollow sections, natural anodised with dividers in 25 mm pitch, guide groove for enclosures separation |
3 | cover part profiles | Aluminum frame hollow sections, natural anodised with dividers in 25 mm pitch, guide groove for enclosures separation |
4 | UT-corner connector | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
5 | ZT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
6 | DT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
7 | baseplate | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically |
8 | cover plate | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically |
9 | connecting bolts | steel M4, self-locking |
10 | profile seal | foam rubber cord, encircling |
11 | panel bonding | permanently elastic, sealing |
12 | between soil | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically |