Built-on enclosure
Built-on enclosure ABG-1 and ABG-2
These built-on enclosures are enclosures of a special kind. On one narrow side, they have apertures for a connector cable with strain relief pillar and for a 2-pole phone jack. If the apertures are not used, plugs are available. The enclosure can be mounted to the wall without opening it, followed by the covering enclosure. On the bottom, you can find pillars for screwing a circuit board. On the upper side, a tool insert for an aperture is provided.
Internal side of the enclosures
| Technical data | |
| dimensions | 4.45 x 3.11 x 0.51 (or 1.18) inch 113 x 79 x 13 (or 30) mm |
| material | ABS (material change possible) |
| color | light gray RAL 7035 |
| black RAL 9005 | |
| protection degree | up to IP54 according to EN 60529 |
| explosion protected | on demand |
| surface resistance | 4 x 10 (high) 14 Ohm according to DIN 53482 |
| dielectrical strength | 24 kV/mm according to DIN 53481 |
| flammability | UL94HB (V0 possible) |
| circuit board layers | 2 |
| weight | ABG-1 ca. 50 g, ABG-2 ca. 70 g |
